Skip to main content

Home  Online Shop   Cleaning Service  Contact Us  FAQ  Calculator  Tutorial  Videos   
Connector Replacement  > Delete Plug Installation  > Lower Seal Installation  > Rebuild How To > Credit Card Payment?  >  
Lower seal installation
 
The author thereof, shall not be held responsible or liable, under any circumstances, for any damages resulting from the use or inability to use the following information.

 

Preparation

Lube the o-rings, seals, and injectors with o-ring lubricant. 

 

Installation

1. Remove old seals from manifold. 

2. Wipe manifold injector boss with a clean rag.

 
3. Install new lower seals into manifold.
4. Install complete fuel rail/injector assembly onto the manifold. Ensure that each injector is properly seated/centered onto each lower seal.
 5. Gently press fuel rail down while installing center rail nut.
6. Once center nut begins to thread into bolt, start to evenly tighten all nuts. Injectors should plunge evenly into seals. Check for leaks. 
 
ValorConseil